XENA 5A 5- Axis CNC Horizontal Boring Mill 130mm 3.2M, 2017

Description

XENA 5A 5- Axis CNC Horizontal Boring Mill 130mm 3.2M, 2017
*Includes 1 Year Warranty **Under 500 hours use XENA TACHYON / FAGOR 3 modes on the same 15” touch screen. – Manual mode – Manual assisted mode TACHYON – FAGOR 8070 “‘CNC’ ‘mode, conversational, or/and G code – Controller: 5 simultaneous axis Note that our TACHYON / FAGOR controller has the ” TeamViewer ” interface, by which it is possible to check and diagnose machine, remotely via the internet. Avoiding costly, and often unnecessary technician traveling when it comes only to parameters and/or programming. SPECIFICATIONS Table: 72 ” ‘x 63’ ‘ Max weight table 17,000 lbs TRAVEL x-axis 126 ” Y axis 78.7 axis Z 78.7 axis W 35.4 Height of table : 56 ” SPINDLE Diameter 130mm (5.1) Nose: BT-50 or CAT-50 Speed (RPM) 10 -2000 Spindle motor: (26HP @ 30 min) Speed ratio 3 (gearbox) FEED Fast feed (X-Y-Z) 10M / min (472’’./min) Fast feed (W): 6M / min (400’’/min) Cutting feed: 5M / min (200’’/min) Table ” B ”: 4 RPM ATC Number of tools: 60 tools (BT or CAT-50) ” ARM TYPE ” (currently on BT) Max tool weight: 55 lbs Max tool length: 15.7 Max tool diameter: 5 (10 in. Without adjacent tools) Change time: 15 sec. Machine weight: 118,000 lbs Floor space: 295 x 301 ” (See attached drawing) Height: 213.5 ” Voltage: 440V 60Hz 3ph Included : Axis “B” @ 360,000 position (+/- 10 μ) with possibility of machining in 4 simultaneous axes on the table. Spindle cooler Automatic power off Hydraulic unit Coolant system Automatic lubrication Alarm light tower LED full interior lighting M.P.G. 5 axis Linear positioning glass scale on the X, Y, Z axes Heat exchanger Chip conveyors Other accessories included: (see details at the bottom of the pages) PROBE Renishaw (RTS + RMP60 (Q) + RMI-Q) Automatic tool length & workpiece probing system 5th axis installed on table with base (see photos below) (Central connection from the top of enclosure for full pivoting) Possibility of (5 axis simultaneously). Includes: Rotary table with a 3-jaw hydraulic chuck (20 ”) with a 6 ” bore HD rolling center with a 3-jaw hydraulic chuck (16 ”) Hydraulic brakes on both ends CTS “Coolant” High pressure through spindle) (15bar = 215 psi) Full enclosure (required with CTS) W 400mm extension support (for vibration-free power machining up to the center of the table) (See photos below) Permanent adapter for: (combined with tool changer) 2 heads at 90 degrees: (1) mini 50/30 + (1) STD 50/50 (see photos below) 1 straight extension 50/50 (see photos below)
XENA 5A 5- Axis CNC Horizontal Boring Mill 130mm 3.2M, 2017
*Includes 1 Year Warranty
**Under 500 hours use
XENA TACHYON / FAGOR
3 modes on the same 15” touch screen.
– Manual mode
– Manual assisted mode TACHYON
– FAGOR 8070 “‘CNC’ ‘mode, conversational, or/and G code
– Controller: 5 simultaneous axis
Note that our TACHYON / FAGOR controller has the ” TeamViewer ” interface, by which it is possible to check and diagnose machine, remotely via the internet.
Avoiding costly, and often unnecessary technician traveling when it comes only to parameters and/or programming.
SPECIFICATIONS
Table: 72 ” ‘x 63’ ‘
Max weight table 17,000 lbs
TRAVEL
x-axis 126 ”
Y axis 78.7
axis Z 78.7
axis W 35.4
Height of table : 56 ”
SPINDLE
Diameter 130mm (5.1)
Nose: BT-50 or CAT-50
Speed (RPM) 10 -2000
Spindle motor: (26HP @ 30 min)
Speed ratio 3 (gearbox)
FEED
Fast feed (X-Y-Z) 10M / min (472’’./min)
Fast feed (W): 6M / min (400’’/min)
Cutting feed: 5M / min (200’’/min)
Table ” B ”: 4 RPM
ATC
Number of tools: 60 tools (BT or CAT-50) ” ARM TYPE ” (currently on BT)
Max tool weight: 55 lbs
Max tool length: 15.7
Max tool diameter: 5 (10 in. Without adjacent tools)
Change time: 15 sec.
Machine weight: 118,000 lbs
Floor space: 295 x 301 ” (See attached drawing)
Height: 213.5 ”
Voltage: 440V 60Hz 3ph
Included :
Axis “B” @ 360,000 position (+/- 10 μ) with possibility of machining in 4 simultaneous axes on the table.
Spindle cooler
Automatic power off
Hydraulic unit
Coolant system
Automatic lubrication
Alarm light tower
LED full interior lighting
M.P.G. 5 axis
Linear positioning glass scale on the X, Y, Z axes
Heat exchanger
Chip conveyors
Other accessories included: (see details at the bottom of the pages)
PROBE Renishaw (RTS + RMP60 (Q) + RMI-Q) Automatic tool length & workpiece probing system
5th axis installed on table with base (see photos below)
(Central connection from the top of enclosure for full pivoting)
Possibility of (5 axis simultaneously).
Includes:
Rotary table with a 3-jaw hydraulic chuck (20 ”) with a 6 ” bore
HD rolling center with a 3-jaw hydraulic chuck (16 ”)
Hydraulic brakes on both ends
CTS “Coolant” High pressure through spindle) (15bar = 215 psi)
Full enclosure (required with CTS)
W 400mm extension support (for vibration-free power machining up to the center of the table) (See photos below)
Permanent adapter for: (combined with tool changer)
2 heads at 90 degrees: (1) mini 50/30 + (1) STD 50/50 (see photos below)
1 straight extension 50/50 (see photos below)
You might also like
Hurco VMX-60SWi VMC, 2019 - 5 Axis, Probe, Low Hours, Available Immediately
Chiron FZ 12FX 5 Axis VMC, 2015 - 6-Axis Robot and Pallet Stack, Automation, Pro
Kitamura MyCenter 1B VMC, 1986 - Pallet Changer
Motoman K10M (2) Station Cell Robot, 2016 - Flow 7X 50 HP Intensifier Pump
eBay integration
by