Veken Ultra-Slim Bidet, Non-Electric Dual Nozzle (Posterior/Feminine Wash)

Description

Veken Ultra-Slim Bidet, Non-Electric Dual Nozzle (Posterior/Feminine Wash) Fresh Water Sprayer Bidet for Toilet, Adjustable Water Pressure Bidet Seat Attachment with Brass Inlet (Silver and White)
Product Description
Veken non-electric bidet for toilet
Retractable nozzle and nozzle guard gate
The nozzle guard gate offers extra protection and ensures our bidet is always ready for a clean operation. When the bidet is turned on, the corresponding nozzle will drop below the guard, when it’s not in use, the nozzle retracts for optimal protection.
Brass water inlet
Compared to other traditional plastic threaded interface, our bidet comes with a brass water inlet, which makes the stainless steel braided hose more compatible with the threaded interface, reducing the risk of product wear and water leakage.
High compatibility
This ultra-slim bidet offers a better toilet seat fit, reducing the risk of water splashing out of the gap. The bidet’s force area and pressure is balanced when seating on the toilet. Our bidet are built to stand the test of time.
3 extra seat bumpers
Although our bidet is slimmer than others, with almost no gaps, we also provide 3 extra bumpers for your convenience. Clean only the toilet seat rings and keep it dry. Stick the bumpers on a flat surface according to the toilet seat radian and spread them out.
Note: No need to use bumpers for small gaps.
Still don’t know the installation of water pipes?
Step 1: Turn OFF the water supply valve at the wall next to your toilet. Then Flush the toilet and hold down the handle to completely empty the toilet tank.
Step 2: Confirm that the small black rubber washer is inside the top of your bidet’s T-connector. (hint: the top of the T-connector is where the swivel nut is).
Step 3: Connect the T-valve to the toilet fill valve. Attach the water supply hose to the bottom of the T-valve. Finally, connect one end of the bidet hose provided to the side of the T-valve.
Step 4:
Screw the other end of the bidet hose provided onto the bidet water inlet. Turn the water supply valve back on. If you notice any loose or leaking connection, you may need to add some Teflon tape.
Still not sure if the bidet fits for your toilet?
A.
The size from the center of the toilet to the edge should not exceed 7.87 inch.
B.
Spacing between screw holes: 4.33”-8.66”.
C.
Spacing between screw holes and bowl: at least 1.18”.
D.
Spacing between screw holes and toilet seat edge:1.97”-3.54”.
E.
Spacing between the center of bidet and wall: at least 11.8”.
Important Reminders:
Please be advised to ensure the small black rubber washer is inside the nut of the T-adapter.
Please confirm whether your toilet size is compatible with our bidet according to the detailed measurements in the above. Improper bidet’s size will interfere your toilet seat.
Package includes
1 x Ultra-slim Dual Nozzle Bidet
1 x Stainless Steel Flexible Hose (2.13ft)
1 x Brass T-connector (15/16" x 15/16" x 9/16")
1 x Teflon Tape
1 x Assembly Instruction
3 x Bidet Toilet Seat Bumpers
Knob's Color
Rose Gold
Pearl White
Gold
Blue
Lavender
Grey
Water Pressure Control
?
?
?
?
?
?
Cleaning Mode
Bidet wash, Female cleaning
Bidet wash, Female cleaning
Bidet wash, Female cleaning
Bidet wash, Female cleaning, Nozzle cleaning
Bidet wash, Female cleaning, Nozzle cleaning
Bidet wash, Female cleaning, Nozzle cleaning
Tee Connection Type
15/16" x 15/16" x 9/16"
15/16" x 15/16" x 9/16"
15/16" x 15/16" x 9/16"
15/16" x 15/16" x 9/16"
15/16" x 15/16" x 9/16"
American standard
Dual nozzle cleaning modes?Posterior mode (for men and women) and Feminine mode (women’s private). The posterior mode offers a more thorough and complete wash while the feminine mode (soft spray) is more comfortable and gentler, an ideal choice for monthly cycles and new mothers.
Brass water inlet?Veken bidet is built with good ABS material and solid brass parts for more durability. Unlike other traditional bidet’s, our bidet comes with a brass water inlet and T-adapter. Brass water inlet is more compatible with the stainless steel flexible hose, reduces product damage and prevents leaks.
Thin and durable?Veken ultra-slim bidet is only 0.24 inches thick yet durable enough to support the inner structure frame. The unique design provides support, maintains the toilet seat level and fits more comfortably with standard toilets.
Easy to install: Veken provides simple and detailed installation instructions and videos for your convenience. It includes 1 stainless steel braided hose (2.13 feet), 1 brass T-adapter, 3 toilet seat bumpers and Teflon tape. All you have to do is ensure proper measurements.
Convenient switch design: Turn the chrome-plated control dial to left or right, with each level increasing or decreasing the water pressure. Ideal for those with mobility restrictions, no need to bend, all you have to do is select the ideal water pressure and cleaning mode.