3 Station Edge Roller Bender Roofing Sheet Metal-Bending Tool For 0‑90 Degree US

Description

Package Included 1* Bending Tool 1* Handle 2* Plugs Application This product is suitable for bending carbon steel and galvanized sheets and can be used for kiosks, garage splashbacks, gutter splash guards, roof splashbacks, outdoor storage, dog kennels, chicken coops, and more. Specifications Color: Green Style: Modern Material: Aluminum Alloy, Carbon Steel Surface Treatment: Plastic Spraying Mount Type: Freestanding Control Type: Manual Assembly Required: Yes Applicable Bending Angle: 0-90° Applicable Material Thickness: 0.3-1mm/ 0.012-0.04 in Recommended Folding Height: 13-130mm/ 0.51-5.12 in Product Size: 34*9.5*26cm/ 13.39*3.74*10.24 in Package Size: 38*32*12cm/14.96*12.60*4.72 in Gross Weight: 4.7kg/ 10.36 lbs Net Weight: 3.7kg/ 8.16 lbs
3 Station Edge Roller Bender Roofing Sheet Metal-Bending Tool For 0‑90 Degree US
Description
This bending tool is not just an addition to your toolbox, it's a handy companion for your creative endeavors, making every bend stable and accurate. It is made of high-strength materials with a plastic spray treatment to ensure that the tool maintains its performance over a long period. Its lightweight and portable body is designed to work flexibly in the workshop, studio, or on-site. Choose it to unleash your creativity!
Key Features
Sturdy and Durable:
The product is made of high-quality aluminum alloy and carbon steel, using plastic spraying technology, with high strength, wear
resistance
, and long service life.
Helpful Assistant:
It is used to form 0-90° bends in sheet metal thickness from 0.3-1.0 mm and folds height from
0.51-5.12 in
ches to easily meet your work requirements, getting a clean and crisp bend.
Thoughtful Design:
Its three-position ball design can make the product bend evenly to the highest end of the length of the straight plate, making the bending more stable and uniform without length limitations, and more suitable for bending metal roof leak plates and guide plates of houses, factories, etc.
Elaborate and Accurate:
With the V-shaped roller design, this product can clamp the material well during bending, reduce the error during bending, and improve your working efficiency.
Adjustable Design
: Knobs on the side easily secure the lift plate to ensure the desired bending height is achieved. The center roller station can also be adjusted independently to make mild-angled bends on a curve.
Easy to Carry & Store:
Compact (
13.39*3.74*10.24 inches
) and lightweight (
9.7 lbs
), this product allows you to carry it with you or store it in your boot without taking up too much space, so you can carry out your work at any time.
Ready to Use:
You receive the product mostly assembled, so all you have to do is install the handle and start using it without the complicated assembly process.
Customer Service:
We aim to provide high-quality products and services.
If you have any questions, please feel free to contact us. We will reply as soon as possible and solve the problem for you.
Details
Practical
Handle
:
It has a comfortable grip and allows you to use or carry this product with ease.
Clear Scale:
It is easy for you to observe and adjust the bending width.
Round Corners:
They care for your skin more than traditional square corners when you use and clean it.
Application
This product is suitable for bending carbon steel and galvanized sheets and can be used for kiosks, garage splashbacks, gutter splash guards, roof splashbacks, outdoor storage, dog kennels, chicken coops, and more.
How to Use
1. Lock the lift plate to the shaft leg at the desired bend height to accurately align all drum depths.
2. Grasp the tool by the handle and slide it onto the edge of the material. Ensure that the material fits snugly against the bottom of the tool V-shaped roller assembly.
3. Gradually apply bending pressure while rolling the tool along the edge of the material each time bending the material upwards by approximately 10-20°. For a 90° bend, you should plan to have the tool run back and forth at least 5 to 8 times.
4. Allow the outer set of rollers to slide off the bend as you reach the end of the material and then reverse direction. This will produce a more uniform bend.
Specifications
Color: Green
Style: Modern
Material:
Aluminum Alloy, Carbon Steel
Surface Treatment:
Plastic Spraying
Mount Type: Freestanding
Control Type: Manual
Assembly Required: Yes
Applicable Bending Angle: 0-90°
Applicable Material Thickness: 0.3-1mm/ 0.012-0.04 in
Recommended Folding Height: 13-130mm/ 0.51-5.12 in
Product Size: 34*9.5*26cm/ 13.39*3.74*10.24 in
Package Size: 38*32*12cm/14.96*12.60*4.72 in
Gross Weight: 4.7kg/ 10.36 lbs
Net Weight: 3.7kg/ 8.16 lbs
Package Included
1* Bending Tool
1*
Handle
2* Plugs
Notes
We recommend that you wear protective gloves (not included) when handling to enhance safety in use.
Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Brand
Unbranded
On Jul 31, 2024 at 09:27:46 PDT, seller added the following information: